Specifications

Engine-2.5 hp Honda                            Pump-HP 100                   Weight-57 lbs

Sluice box-10" x 36"                              Dredge hose-2" x 10'

Dredge pressure-hose 1.25" x 10'       pressure hose-1.25" x 25'

Jet-2" x 1.25" slip                                  capacity-Up to 2 yards per hour

 

  Combo/2.5hp Honda/HP100 pump-$1650

 

 

Combo w/o engine, pump, foot valve & FV hose-$1050

Only $100 charged for shipping on this unit

The Proline 2” combination highbanker/dredge is an excellent tool for both the beginner and the seasoned prospector.  It is small, lightweight, and very affordable.  It can used as a 2” dredge that is useful for doing crack work or remote location dredging, or as a highbanker that can be continuously fed with a small shovel.  The engine is quiet and does not require mixed fuel.  The two spraybars each have two rows of holes to wash your material.  Threaded caps allow you to easily remove any debris that may plug the spray holes.  The new riffle design has improved fine gold recovery through some adjustments in riffle profile and timing. Nomad matting and triple classification make an unbeatable combination for recovering

$1550

the fine gold particles of the Midwest.  The stand has individually adjustable legs that allow you to set up on uneven terrain.  The adjustable legs also allow you to set the unit low if you don’t cherish the thought of shoveling material high all day long.  I have found this works especially well when set up in a situation where your tailings are either carried away by current or falling into a hole.  The drawback to the 2”unit is that it is too small to power an air compressor, this is important to consider if you are planning to prospect cracks located more than a few feet feet deep.  I have shipping charges added at checkout of $150 for the first unit, and $75 for each additional unit.   A refund will be issued if shipping is less than what is charged.  Lower shipping rates can be obtained through multiple items ordered or by arranging a pick up time and place with me.  The checkout will automatically charge you, I will either charge back overages to your credit card or send you a refund check with your purchase.                                                            

The JOBE Power Sluice and 2 inch dredge combo is designed around the JOBE 48 inch Yellow Jacket stream sluice. The JOBE adjustable 4 leg stand and the JOBE Hibanker Hopper are attached

to the sluice. Powered by a Power Lift 6.5 horse power, 4-cycle, gasoline pump. The pump and engine combination weighs only 54 pounds and is mounted on a shock-resistant base plate inside a

roll cage. This unit comes complete with everything you need to use it as either a hibanker or as a 2 inch dredge including all the parts, hoses and clamps. The sluice also comes with an aluminum flare, not shown, which replaces the Power Sluice Header Box so that the sluice can also be used as a stream sluice.

 

Not all items included are shown in the picture.

Shipping charges are the same as for the Proline listed on top of the page.

 

$1250 plus shipping